Color Laser Heat Transfer Papers for use in Fuser Oil Color Laser Copiers and Printers
 | |
|
TransRoyal MAX
TransRoyal MAX can be applied to most white or light colored fabrics and mouse pads
with a heat press for 15-20 seconds at 375°F with a medium pressure and a peel hot.
TransRoyal Max runs well in Canon, Xerox (except 5775), Ricoh and QMS/Milolta color copiers as well as any printers which use FUSER OIL.
It has a soft feel after transfer and has good washability.
MAX is the most popular paper we sell.
| 
|
TransRoyal Dark
Our newly improved TransRoyal Dark is a break through
in the heat transfer industry allowing you to transfer to dark garments.
TRD can be used in fuser oil as well as dry resin fuser copier/printers.
Simply print a NON Mirrored image onto the paper and cut out any excess white material.
Then peel the transfer off the backing sheet and place on any dark fabric.
Cover with a Teflon Sheet, then heat press for 20-25 seconds
at 360°F and peel the Teflon sheet cold.
TRD is very simple to use, has excellent image quality and great washablity.
| |
|
FlexiTrans HS
FlexiTrans Hard Surface works in most color laser copier/printers which use Fuser Oil.
This paper is specifically designed to transfer ONLY the toner/image, no other coatings.
HTHS can be applied to coated coffee mugs (apply at 325°F for 120 seconds), raw tile (apply at 325°F for 90 seconds), plastics (apply at 275-325°F for 60 seconds), vinyl (apply at 250°F for 50 seconds), magnetic material (apply at 250°F for 60 seconds), wood and most non-porous surfaces. These are just basic instructions which may be adjusted to your product needs.
When applying to CLC Coated tiles and mugs,
they must be further cured in an oven for 5-10 minutes at 400°F.
For most surfaces, except mugs, use of our special
Thermal Pad is necessary for a proper transfer application.
The paper can only be applied with a heat presses and can be peeled warm or cold.
|
 |
CoolTrans
CoolTrans is a hot or cold peel paper that can be applied by hand iron or heat press.
It works in most color copiers that use Fuser Oil. It has a heavier coating than Max,
so it is especially good on heavy weave sweatshirts and tote bags.
It can also be applied to vinyl (apply at 250°F for 50 seconds and peel cold),
tyvek (275°F for 40 seconds and peel hot or cold) and wood.
For fabrics apply at 375°F for 15 to 20 seconds.
For T-Shirts, peel hot, for sweats, and tote bags, peel cold.
| |
|
NEW!!! TransTech Super Gloss NEW!!!
TransTech Super Gloss is a COMMERCIAL FINISHING SHEET, NOT A TRANSFER PAPER
Using TTSG in a second pressing, lets you produce a glossy sheen
to any of our Color Laser or Ink Jet heat transfer papers.
TTSG is cut slightly larger for complete coverage of your transfer
and is easy to use giving you excellent results.
|
|
